SolarPVInvestor

Monday, 30 September 2013 05:37

Thin Film Manufacturing 2012

Written by 
Rate this item
(0 votes)
Thin-Film Manufacturing 2012
Cadmium telluride (CdTe)

Conversion best reported ~14.4% module, 17.3% cell in lab tests

~ 12.4% commercial

2,250 MW 
amorphous silicon thin-film

Conversion  ~ 10%

1,000 MW 
CIS (copper, indium, selenium)

Conversion ~ 12.6% commercial

980 MW 
amorphous silicon (a-Si) layer and a microcrystalline silicon (µc-Si) layer 500 MW
amorphous silicon thin-film

Conversion ~ 9% commercial

500 MW ?
a-SiGe (µc-Si) layer

Conversion ~ 9% commercial

300 MW
amorphous silicon thin-film

Conversion ~ 9% commercial

265 MW
amorphous silicon (a-Si) layer and a microcrystalline silicon (µc-Si) layer 245 MW
CIGS monolithic design (no cells)

Conversion ~ 14.1%

200 MW jv TSMC
µc-Si tandem

Conversion >10%

160 MW
amorphous silicon (a-Si) layer and a microcrystalline silicon (µc-Si) layer 150 MW
amorphous silicon (a-Si) layer and a microcrystalline silicon (µc-Si) layer 130 MW
Hyundai Avancis jv between Hyundai and Saint-Gobain CIGS  100 MW (400 MW in 2015 planned)
amorphous silicon (a-Si) layer and a microcrystalline silicon (µc-Si) layer

Conversion best reported- 10% commercial

75 MW
amorphous silicon (a-Si) layer and a microcrystalline silicon (µc-Si) layer 61 MW
copper indium gallium selenide (CIGS)

Conversion ~ 14% commercial , 17.3% lab

50 MW
copper indium gallium selenide (CIGS)

Conversion best reported ~13.4%

 
     
     
     
     

 

Read 19 times
Tweet
More in this category: « Wafer to Module 2011-2013

Leave a comment

Make sure you enter the (*) required information where indicated. HTML code is not allowed.

Most read

PREMIUM REPORTS

« October 2013 »
Mon Tue Wed Thu Fri Sat Sun
  1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31